Open Source License; Oven Cooling; Timer; Operating The Oven - LG WSES4728F Manual Del Propietário

16 OPERATION
CAUTION
• All stored data will be deleted.
1
Touch Settings at the center bottom of the
Main screen, swipe to the third Settings
screen, and touch Factory Data Reset.
2
If you want to reset data to the factory
defaults, touch RESET and then OK.

Open Source License

This screen displays a list of the open source
software contained in this product. Refer to the
indicated licenses for the terms and conditions of
their use.
1
Touch Settings at the center bottom of the
Main screen and swipe to the fourth Settings
screen.
2
Touch Open Source License.

Oven Cooling

The oven cooling icon appears in the display if the
temperature inside the oven is high during or after
operation. The icon disappears if the oven
temperature is below 210

Timer

The oven timers don't affect oven operation or
cooking time. Use them as extra kitchen timers.
Once the time runs out, the oven chimes and
"Timer 1 or 2 finished" appears in the display.
Setting the Timer
1
Touch either clock icon at the bottom of the
display.
Clock icon
(100 ).
10:25
AM
2
Scroll through the numbers in the popup until
the desired time appears in the display, or
touch the number pad icon to enter the
numbers directly, and touch OK.
Number pad icon
3
The time remaining appears next to the clock
icon in the display.
Adjusting or Cancelling the Timer
1
Touch the remaining time next to the clock
icon in the display.
2
To cancel the timer, touch the Reset icon in
the popup. Then touch OK.
Reset icon
3
To adjust the time, scroll the numbers in the
popup until the desired time appears. Then
touch OK.
4
The remaining time in the display is adjusted.

Operating the Oven

Before Using the Oven

NOTE
• Because the oven temperature cycles, an oven
thermometer placed in the oven cavity may not
9:20
PM