Technical Information - HOMCOM 820-280V90 Manual Del Usuario

Ocultar thumbs Ver también para 820-280V90:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

WARNING: FIRE RISK EXISTS IF THE HEATER IS COVERED BY
OR POSITIONED CLOSE TO CURTAINS OR OTHER
COMBUSTIBLE MATERIALS.

Technical information

1. Misting
2. Handle
3. Control Panel
4. Panel
5. Protective Net
6. Base
7. Water Tank
8. Water Drain Nut
9. Filter
10. Air Inlet
11. Power Botton
Instructions for use
Fill the water tank:
Unscrew the valve cover to open the tank turning it anticlockwise, fill the tank with cold and clean
water making sure not to overfill it. To close the tank, screw the valve cover back on securely turning it
clockwise. Turn the tank over and place it back into its designated space at the back of the heater
main body.
Loosen
Tighten
ATTENTION!
• Make sure the product is unplugged from the mains before filling or refilling the water tank.
• Only use water in the water tank. Do not add any chemicals, oils or other additives.
• Only use cold or lukewarm water in the water tank. The water must not be warmer than 40° C.
2

Publicidad

Tabla de contenido
loading

Tabla de contenido