All manuals and user guides at all-guides.com
POWERBOX CONTROLS (on the radiator)
The powerbox has a button which allows you to carry out the binding procedure
and, if necessary, control the radiator without using My NEEDO. The response
of the LED indicates the status of your radiator. The table below gives a brief
description of radiator status.
LED
STATUS
Red
Room temperature lower than the set-point
Green
Room temperature higher or equal to the set-point
Off
stand-by
Slow red
boost / auto-test (for 30 sec. after binding)
Red /green
Radio network search
Slow green
Radio network found
Rapid green
binding in progress
Rapid red
Error signal: see Diagnostics sect. (page 69)
EN
47