All manuals and user guides at all-guides.com
MENU - ASSISTANCE
•
Install radiator
: allows you to install new radiators. For this procedure refer to
the instructions on page 51.
•
Delete radiator
Whenever the powerbox receives this command, the LED on it will start to
flash red/green. If you intend to bind the powerbox to My NEEDO again (new
installation radiator-binding), carry out a new reset procedure followed by
interruption of the power supply to the radio. If the radiator is linked to a zone,
it cannot be eliminated (see page 59 -
Caution: confirming the
68
no longer be used until the next binding procedure is performed (see initial
installation – binding phase).
: select the radiator to be eliminated and press
delete radiator
Modify/delete
zone).
operation means that the radiator can
.