Powerbox Reset Procedure - NEEDO My Manual Del Usuario

All manuals and user guides at all-guides.com

POWERBOX RESET PROCEDURE

•
Case 1 - Flashing LED (red/green or green)
If the powerbox is in this state, keep the button on the powerbox pressed for
more than 3 sec. so that the LED becomes flashing red.
After which, press the button again for more than 3 seconds to reset.
• Case 2 - LED is not flashing (on or off)
In this case, just keep the button on the powerbox
pressed for more than 3 sec. to reset.
70