Connecting Other Sources; Advanced Setup Options; Cable Indications - Denon S-101 Instrucciones De Operación

2 To mute the sound
Use this to turn off the audio output temporarily.
MUTE
Press the button.
• Cancelling MUTING mode:
q Press the MUTE button again.
w Press the VOLUME button on the remote control unit, or
adjust the volume up or down via the front panel VOLUME
control knob.
2 To stop the playback
During playback, press the 2 2 button.
2 To turn off the main unit
ON/STANDBY
Press the switch.

Connecting Other Sources

Advanced setup options

Cable indications

The hookup diagrams on the subsequent pages assume the use of the following optional connection cables (not supplied).
When connecting other equipment, disconnect the power supply cord from the AC power outlet before connecting other equipment.
Audio cable
A
Analog terminal (Stereo)
(White)
L
(Red) R
Pin-plug cable
B
Digital terminal (Coaxial)
(Orange)
Coaxial cable (75 Ω/ohms pin-plug cable)
C
Digital terminal (Optical)
Optical cable (Optical fiber cable)
Signal direction
Audio signal
IN OUT
Video signal
IN OUT
NOTE:
• Do not plug in the power supply cord until all connections have been completed.
• When making connections, also refer to the operating instructions of the other components.
• Be sure to connect the left and right channels properly (left with left, right with right).
• Note that binding pin-plug cables together with power supply cords or placing them near a power transformer will result in
generating hum or other noise.
14
ENGLISH
D
Video terminal
L
(Yellow)
R
Video cable (75 Ω/ohms video pin-plug cable)
E
S-Video terminal
F
Component video terminal
(Green)
(Blue)
(Red)
G
SCART terminal
OUT IN
OUT IN
ENGLISH
Connecting Other Sources
Video cable
S Video cable
(Y)
(P /C )
B B
(P /C )
R R
Component video cable
21-pin SCART cable