Setting "Channel Level - Denon S-101 Instrucciones De Operación

ENGLISH
System Setup
3 When "COMPRESSION" is selected:
CURSOR •
Press the or
desired setting item, then press the
-4
button.
OFF (Factory default):
Set to "OFF" to turn this function off.
LOW, MID, HIGH:
This parameter adjusts the dynamic range of the Dolby Digital or
DTS sound. When listening with the volume turned relatively
low, at night for example, set this to the "HIGH" side to lower
the peak of the sound and amplify the quieter sounds, narrowing
the dynamic range and making the sound easier to listen to.
With DTS source, only displayed for sources compatible with
dynamic range compression.
3 When "AUDIO DELAY" is selected:
ª
button to select the Press the
ENTER
desired setting item, then press the
-5
button.
0 ~ 200mSEC (Factory default 0mSEC) :
When watching a DVD or other video source, the picture on the
monitor may seem delayed with respect to the sound. In this
case, adjust the audio delay to delay the sound and synchronize
it with the picture.
The audio delay setting is stored separately for each input
source.
With a movie source, for example, adjust so that the
movement of the actor's lips is synchronized with the sound.
The audio delay setting does not apply when playing in the
analog input and stereo mode. (DIRECT ON)
4
Press the
SETUP MENU", then press the
the setting.
• The next screen in the "SETUP" menu screen appears.
CURSOR •
ª
or button to select the
ENTER
CURSOR ª
button to select "NEXT
ENTER
to enter
47
ENGLISH

Setting "CHANNEL LEVEL"

• Adjust so that the playback levels of the different channels are
equal.
• Make this adjustment by listening to the test tones output from
the speakers at the listening position.
Use the VOLUME control knob on the main unit or the VOLUME
buttons on the remote control unit to adjust the volume of the
test tone to a level at which it is easy to make this adjustment.
1
CURSOR •
ª
Press the or
"SPEAKER SETUP" at the "AUDIO SETUP",
ENTER
then press the button.
• The "SPEAKER SETUP" screen appears.
System Setup
button to select