Pausing Or Restarting The Washer; Stopping The Washer; Changing Cycles, Modifiers, And Options - KENMORE ELITE Oasis HT 110.2808 Manual De Uso Y Cuidado

Ocultar thumbs

Tabla de contenido

Idiomas disponibles

When using a laundry booster (powder or liquid):

■

Be sure to select Timed Oxi from the options to assure

proper dispensing.

■

Laundry boosters are automatically dispensed at the

proper time during the wash cycle.

■

Do not mix laundry boosters and liquid chlorine bleach in

the same cycle.

When using liquid chlorine bleach:

■

Do not select Timed Oxi option. No option selection is

necessary for proper dispensing of liquid chlorine bleach.

■

Do not mix laundry boosters and liquid chlorine bleach in

the same cycle.

■

Do not overfill. Do not dilute. Do not use more than 1 cup

(250 ml).

■

Follow the garment and chlorine bleach manufacturer's

directions for proper use.

■

To avoid spilling, use a cup with a pouring spout. Do not

let bleach splash, drip, or run down into the washer

basket.

4. Pour measured liquid fabric softener into the fabric softener

dispenser, if desired.

■

If you are using fabric softener, be sure to select Fabric

Softener from the options to assure proper dispensing.

■

Do not overfill. Do not dilute. The dispenser holds 3 oz

(94 mL), or a capful of fabric softener.

■

The fabric softener is dispensed in the rinse cycle. If 2nd

Rinse is selected, the fabric softener will be dispensed

during the 2nd Rinse.

■

Do not use fabric softener dispensing balls in this washer.

Dispensing balls will not operate correctly with this

washer.

■

Do not spill or drip any fabric softener onto the clothes.

■

At the end of the cycle, a small amount of water may be

left in the dispenser. This is normal.

NOTE: Use only liquid fabric softener in this dispenser.

5. Close the washer lid.

6. Press POWER. This turns on the washer display.

7. Select a Wash Cycle. See "Cycles."

8. Adjust the Modifiers, if desired. See "Modifiers."

9. Select desired Options. See "Options."

10. Select Delay Start, if desired. See "Delay Start" in the

"Modifiers" section.

11. Press START. The wash cycle begins, and the display shows

the estimated remaining time. The lid will lock.

NOTE: If you do not press Start within 5 minutes of pressing

Power, the washer automatically shuts off.

All manuals and user guides at all-guides.com

Add A Garment

You can place additional clothing in the wash when the "Add A

Garment" status light is glowing without sacrificing wash

performance.

To add a garment or pause the washer at any time

1. Press STOP once.

2. Wait until the Lid Lock light turns off, then open the lid.

3. Add items.

To restart the washer

1. Close the lid and press START.

2. To unlock the lid after the Add A Garment period, press STOP

You can stop the wash cycle and drain the tub by pressing the

STOP button twice or the POWER button once.

You can change Cycles, Modifiers, and Options anytime before

Start is pressed. Not all Modifiers and Options are available for all

cycles.

■

Changing Cycles during the wash cycle

1. Press STOP twice to cancel the cycle. The washer will drain.

2. Press POWER.

3. Select the desired wash cycle.

4. Select the desired Modifiers and Options.

5. Press START.

The washer restarts at the beginning of the new cycle.

NOTE: If you do not press Start within 5 minutes of pausing the

washer, the washer automatically shuts off.

Changing Modifiers and Options during the wash cycle

You can change a Modifier or Option anytime before the selected

Modifier or Option begins. You must:

1. Press STOP once.

2. Select the desired Modifiers and/or Options.

3. Press START.

To manually drain the washer and spin the load

1. Press STOP twice to cancel the wash cycle and drain the

2. Press POWER.

3. Press RINSE/DRAIN & SPIN.

4. Press 2nd RINSE.

5. Press START.

When the spin is complete, the lid unlocks. Items can be

removed from the washer.