Anycom Car-Kit HCC-250 Manual Del Usuario página 25

Table 1: Power on/off
CURRENT STATUS
FUNCTION
PHONE
Turn On
Turn Off
Table 2: Pairing/Connections
CURRENT STATUS
FUNCTION
PHONE
Enter pairing
mode
Erase all paired
profiles
Pair Car-Kit with
Power on
phone
Connect (CarKit Standby
with phone) (disconnected)
Disconnect Standby (connect)
Table 3: Call Functions
CURRENT STATUS
FUNCTION
PHONE
Answer Call Incoming call
Reject Call Incoming call
End Call Talk
Redial Standby
Voice Dialing Standby
Cancel Voice
Voice Dialing
Dialing
All manuals and user guides at all-guides.com
OPERATION
HCC-250
Press and hold button
Power Off
least 3 seconds
Press and hold button
Standby
least 3 seconds
OPERATION
HCC-250
Press and hold button
Power Off
least 6 seconds
Press and hold button – for at
Paring Mode
least 3 seconds
Follows your phone`s user
guide to complete pairing
Paring mode
procedure.
Passkey is "0000"
Standby Press button
(disconnected) connection from the phone
Press and hold button
at least 3 seconds or refer to
Standby
phone manual to initiate the
(connect)
connection from the phone
side.
OPERATION
HCC-250
Incoming call Press button
Press and hold button ━ for
Incoming call
at least 3 seconds
Talk Press button
Press and hold button + for at
Standby
least 3 seconds
Press and hold button ━ for
Standby
at least 3 seconds
Press button ━
Voice Dialing
HCC-250 INDICATOR
AUDIO TONE
for at
2 power-up tones
for at
2 power-down tones
HCC-250 INDICATOR
AUDIO TONE
2 power-up tones, and
for at
then 1 pairing tone
1 connecting tone
or set up
1 connecting tone
for
HCC-250 INDICATOR
AUDIO TONE
Key Tone
Key Tone
Key Tone
Page 8
LED INDICATOR
LED Pattern 1
LED Pattern 5
LED INDICATOR
LED Pattern 3
LED Pattern 1
LED Pattern 2
LED Pattern 2
LED Pattern 1
LED INDICATOR
LED Pattern 2
LED Pattern 2
LED Pattern 2
LED Pattern 2
LED Pattern 2
LED Pattern 2
English