cleanAIR Verus air Manual De Usuario página 11

72 00 15 VariGEAR sweatband (pck of 2)
72 00 14 Rear padding VariGEAR
72 00 16 Upper padding VariGEAR
72 00 17 VariGEAR comfort set (set of
sweatband and paddings)
13 51 60 Battery 3V for AerTEC™ S60 ADF
71 00 60 Light flexi hose QuickLOCK ™
40 51 62 Auto-darkening filter AerTEC™
S60+, 5-8/9-14
70 30 60 Face seal CleanAIR® Verus
70 30 71 Protective head cover, flame retar-
dant (Verus, Omnira)
70 30 72 Protective neck cover, flame retar-
dant (Verus, Omnira)
70 30 73 Protective head&neck cover, flame
retardant (Verus, Omnira)
70 40 80 Protection plate outer
*100/65 Protection plate inner
4. Approved combinations
Product code Product description
30 00 00* CleanAIR® AerGO®
81 00 00* CleanAIR® Basic
63 00 00* CleanAIR® Pressure
CleanAIR® Pressure
67 00 00*
Flow Master
51 00 00* CleanAIR® Chemical 2F
* including all derived variants
This product is approved to be in accordance
with the Regulation (EU) 2016/425 on PPE
and as was tested meet requirements of the
following standards:
Notified body for the CE
approval:
EN 166:2002
ECS European Certification
Service GmbH, Notified body
EN
1883
379+A1:2009
Hüttfeldstraße 50, 73430
Aalen, Germany
EN 12941:1999
+A2:2009
EN
14594:2019
EN 175:1998
Declaration of Conformity is available at:
https://www.clean-air.cz/doc
Markings according to
EN 379 (4 / 5-8 / 9-13 AT 1/1/1/2/379 CE)
CE 1883
Class
TH3
3/5-8/9-14
TH3
2A
3B
AT
TH3
1/1/1/1
EN 379
Markings according to EN 175 (EN 175 B CE)
EN 175
B
MS
Markings according to
EN 166 (166 MS 1 B CE) / (AT 1B CE)
Notified body for the CE
approval:
Occupational Safety Research
Institute, v.v.i., Notified body
1024
Jeruzalémská 1283/9, 110 00,
Prague 1, Czech Republic
Notified body for the CE
approval:
Institute for testing and cer-
tification
třída Tomáše Bati 299, Louky,
763 02 Zlín, Czech Republic
Notified body 1023
identification of the Notified
body for CE approval
4 - protection shade number in
open state shade
5-8/9-13 – protection shade
numbers in closed state shade
Identification of manufacturer
(ANTRA TECHNOLOGIES
LTD)
optical classes - optical quality
/ light scattering / homogeneity
/ angular dependence
number of the standard
number of the standard
impact rating (medium energy impact
120m/s)
compliance symbol
Identification of manufacturer (MALI-
NA - Safety s.r.o.)
CO.
5