Uline H-6355 Manual Del Usuario página 2

4. Determine which side of each short pipe has longer
threading. (See Figure 2)
5. Screw flange onto the short threading end of a short
pipe. Tighten flange. (See Figure 2)
Figure 2
Long Threading
6. Repeat for remaining flanges and short pipes.
NOTE: Ensure flanges are screwed to short
pipes as tight as possible. (See Figure 2)
7. Install the short pipe and flange onto the upright
assembly. (See Figure 3)
NOTE: Tighten with the flange for extra torque,
ensuring flange is screwed as tight as possible.
Figure 3
Upright
Assembly
8. Loosen the flange just enough so the screw holes
are positioned like in Figure 4.
Figure 4
PAGE 2 OF 9
ASSEMBLY CONTINUED
Short Threading
Short Pipe
Short Pipe
Flange
9. Position the upright on the
wall so both flanges are flat
against the wall and the
leveler is making contact
with the floor. (See Figure 5)
Flange
10. Using a level, ensure the
upright is perpendicular to
the floor. (See Figure 6)
11. To attach to the wall, start with the top of the unit.
While one person holds the upright still by applying
pressure, have the second person use a pencil to
trace the flange and screw hole positions.
NOTE: If required, rotate the flange so the screw
holes are positioned like Figure 4.
12. Remove the upright assembly and use the pencil
marks to install anchors. (See Figure 7)
Figure 5
Figure 6
90°
Figure 7
0121 IH-6355