Uline H-6355 Manual Del Usuario página 3

Unidad para pared estilo tubería
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

13. Repeat to secure the lower
flange.
14. Use hangrail to position
remaining upright 48" from
opposite upright.
(See Figure 8)
15. Repeat steps 9-11 for second
upright.
NOTE: Repeatedly check
on center distance and
level the uprights before
permanently installing.
ATTACHING HANGRAIL
1.
Determine the height the hangrail should be
installed and count up to the required slot on the
installed wall unit.
2. Tilt the hangrail up and insert the top teeth of the
hangrail brackets into the desired slots. (See Figure 9)
3. Rotate the hangrail down while pushing toward
upright so all of the bracket teeth engage the slots.
ATTACHING SHELF
1.
Identify the left and
right shelf brackets.
(See Figure 10)
PAGE 3 OF 9
ASSEMBLY CONTINUED
Figure 8
48" on
Center
Hangrail
Figure 9
Hangrail
Figure 10
Left Bracket
Right Bracket
2. Determine height the shelf should be installed and
count up to the required slot on wall unit.
3. Tilt shelf bracket up and insert the top tooth of the
shelf bracket into the desired slots. (See Figure 11)
4. Rotate the bracket down while pushing toward
the upright so all of the bracket teeth engage the
slotted standards. (See Figure 11)
5. Repeat for second bracket.
6. Place the shelf onto the installed brackets so they
engage the route on the bottom of the shelf wood.
(See Figure 12)
1-800-295-5510
uline.com
Routes for Shelf Brackets
Front of Shelf
Figure 11
Figure 12
0121 IH-6355

Publicidad

Tabla de contenido
loading

Tabla de contenido