Cleaning The Device Surfaces; Technical Data; Troubleshooting - DeWalt DDF2130000 Traducido De Las Instrucciones Originales

5.5 Cleaning the Device Surfaces

NOTICE Damage to surfaces: Do not use any
thinners, solvents, gasoline, etc. for cleaning
purposes.
– Clean the Nail Setting Tool using dry cloths.
– Clean the tool box with dry cloths and
compressed air.
6

Technical Data

Category
Length with
single-shot
attachment
Length with magazine
Weight with
single-shot
attachment
Weight with magazine
Magazine capacity
Power levels
Sound power level*
Sound pressure level*
Vibrations*
Year of manufacture
Type
Length (magazine)
Length (single shot)
Calibre
Type
Power levels
*Values can vary: The work environment,
workpiece support, workpiece, contact pressing
force and so forth affect the noise development
at the place of operation and the effects of
vibrations on the object.
Subject to technical changes.
All manuals and user guides at all-guides.com
Type P3X
Indirect fi ring, low speed
430 mm
455 mm
2.8 kg
3.2 kg
10 nails
Yellow (4), red (6)
LWA 96 dB
LpA (workstation) 94 dB
LpA (max.) 135 dB
< 2.5 m/s²
2013
Shooting Nails
8.6 mm head nails
15 mm bis 60 mm
up to 76 mm
Cartridges
0.25
Type 10 round cartridges
(6.3/10)
Yellow (4), red (6)
7

Troubleshooting

Only perform troubleshooting measure that are
specifi ed here.
The Nail Setting Tool may only be maintained
and repaired by an authorized specialist
workshop.
Cartridge does not fi re:
Cause(s)
Barrel not pressed
fi rmly enough against
the surface
Cartridge did not rotate
Malfunction of the
cartridge
Nail Setting Tool
defective
Barrel or piston blocked:
Cause(s)
Nail Setting Tool has
overheated
Foreign object in the
barrel or piston guide
Bent barrel
Forbidden or
unauthorized Shooting
Nails in the magazine
or single-shot
attachment
Nail Setting Tool
defective
English
Measure(s)
Press the barrel harder
against the surface
Check the transport
latch.
Remove foreign objects
Insert a new cartridge
Have the Nail Setting
Tool be repaired by an
authorized specialist
workshop
Measure(s)
Let the Nail Setting Tool
cool down
See chapter 5
„Inspection and
Cleaning"
Have the Nail Setting
Tool be repaired by an
authorized specialist
workshop
See chapter 2.5
„Shooting Nails" and
chapter 6 „Technical
Data
Have the Nail Setting
Tool be repaired by an
authorized specialist
workshop
41