Keep-Warm Function - ARENDO 305648 Manual Del Usuario

3. Use the "Steam Level" mark as a reference for the maximum quantity of
water and close the lid of the appliance.
4. Press the "FUNCTION" button to select "STEAM".
5. The indicator for "STEAM" starts glowing.
6. Press the "Start/Reheat" button to start the program.
6.8 Cake
1. Add the desired ingredients for the cake.
2. Place the cooking vessel in the housing of the rice cooker and make sure
that the vessel is level and properly connected to the heating plate.
3. Press the "FUNCTION" button to select "Cake".
4. The indicator for "Cake" starts glowing.
5. Press the "Start/Reheat" button to start the program.
6. If the cake is not ready after the first trial, repeat the "Cake" function until
the result is satisfactory.

6.9 Keep-warm function

The keep-warm function is automatically started after the cooking is completed.
Alternatively, you can start the keep-warm function manually by pressing the
"Keep Warm / Cancel" button. To switch off the keep-warm function, press the
button again or disconnect the power cord from the socket.
7. Reheat function
Press the "Keep Warm / Cancel" button. "OH" is shown on the display and the sta-
tus LED for "Keep Warm / Cancel" starts glowing. Then press the "Start/ Reheat"
button. "00:25" is shown on the display and "Start / Reheat" starts glowing. The
keep warm function then starts for 25 minutes.
8. Delay function
After preparing, press the "FUNCTION / SELECT" button and select the cooking
function you wish to use.
34
English