Tabla de contenido
Publicidad
• Do not apply too much pressure on the tool; let the sanding surface do the work for you
Your machine is double insulated in accordance with EN60745; therefore no earthwire is required.
MAINTENANCE
Make sure that the machine is not live when carrying out maintenance work on the motor. Regularly
clean the machine housing with a soft cloth, preferably after each use. Keep the ventilation slots free from dust
and dirt. If the dirt does not come off use a soft cloth moistened with soapy water. Never use solvents such as
petrol, alcohol, ammonia water, etc. These solvents may damage the plastic parts.
The machine requires no additional lubrication.
If a fault occur, e.g. after wear of a part, please contact your local dealer's service.
ENVIRONMENT PROTECTION
In order to prevent the machine from damage during transport, it is delivered in a sturdy packaging. Most of
the packaging materials can be recycled. Take these materials to the appropriate recycling locations. Take
your unwanted machines to your local dealer. Here they will be disposed of in an environmentally safe way.
Discarded electric appliances are recyclable and should not be discarded in the domestic waste!
Please actively support us in conserving resources and protecting the environment by returning this
appliance to the collection centres (if available).
We declare under our sole responsibility that this product is in conformity with the following standards or
standardizeddocuments:
EN61000-3-2/A2:2009; EN61000-3-3:2008; in accordance with the regulations 2006/42/ЕEС, 2006/95/ЕEС,
2004/108/ЕEС.
NOISE/VIBRATION Measured in accordance with EN60745 the sound pressure level of this tool is <93,4
dB(A) and the sound power level is <104.4 dB(A) (standard deviation: 3 dB), and the vibration is <4,674 m/s
main handle).
Schwingschleifer
EINLEITUNG
Dieses Werkzeug ist für das Trockenschleifen und Fertigbearbeiten von Holz, lackierten Oberfl ächen,
Kunststoff und Spachtelmasse bestimmt
TECHNISCHE DATEN
WERKZEUG-ELEMENTE
1 Ein/Aus-Schalter
2 Knopf zum Verriegeln des Ein/Aus-Schalters
3 Hebel zum Wechseln des Schleifbands
4 Pfeil
5 Knopf zum Justieren der Bandzentrierung
6 Staubbeutel
SICHERHEIT
ACHTUNG! Sämtliche Anweisungen sind zu lesen. Fehler bei der Einhaltung der nachstehend aufgeführten
Anweisungen können elektrischen Schlag, Brand und/oder schwere Verletzungen verursachen.
• Vermeiden Sie Beschädigungen durch Schrauben, Nägel und ähnliches an Ihrem Werkstück; entfernen Sie
DECLARATION OF CONFORMITY
EN60745-1:2009; EN60745-2-4:2009; EN55014-1/A1:2009; EN55014-2/A2:2008;
2
(
4
Publicidad
Tabla de contenido
