2.1) Operating limits
Chapter 9 "Technical Characteristics" provides the only data needed to determine whether the products are suitable for the intended appli-
cation.
2.2) Typical system
2
1. Control Unit A60
2. Flashing light with incorporated aerial
3. Key-operated selector switch
4. Motors
2.3) List of cables
The typical system shown in figure 2 also states the cables required for connection of the various devices, the specifications of which are
provided in table 1.
!
The cables used must be suitable for the type of installation; for example, an H03VV-F type cable is recommended for indoor
applications, while H07RN-F is suitable for outdoor applications.
Table 1: List of cables
Connection
A: Electrical power line
B:
Flashing light with aerial
C: Electric lock
D:
Photocells
E: Key-operated selector switch
F:
Connection to the motors.
G:
Connection to sensitive edge
Note 1: power supply cable longer than 30m may be used provided it has a larger gauge, e.g. 3x2,5mm
is provided near the automation unit.
All manuals and user guides at all-guides.com
5. Couple of photoelectric cells PHOTO
6. Couple of photoelectric cells PHOTO 1
7. Sensitive edge
8. Radio transmitter
Tipo cavo
N°1 cable 3x1,5mm
2
N°1 cable 2x0,5mm
2
N°1 shielded cable type RG58
N°1 cable 2x1mm
2
N°1 cable 2x0,25mm
(Tx)
2
N°1 cable 4x0,25mm
(Rx)
2
N°1 cable 4x0,25mm
2
N°1 cable 4x1,5mm
2
N°1 cable 2x0,25mm
2
Maximum admissible length
30m (note 1)
20m
20m (less than 5m recommended )
20m
30m
30m
30m
3m
30m
, and that a safety earthing system
2
5