Digital Signal Processor; Using The Digital Signal Processor - Pioneer FH-P4100R Manual De Operación

Section
10

Digital Signal Processor

Using the digital signal
processor
1 2
4 5
6
The digital signal processor lets you control
many aspects of sound output including
equalization, sound field control and listening
position.
1 Position indicator
Shows which listening position is presently
selected.
2 Preset equalizer indicator
Shows which equalizer preset is presently
selected.
3 Function display
Shows the function status.
4 SW indicator
Shows when the subwoofer output is turned
on.
5 CUSTOM indicator
Shows when custom equalizer curve is pre-
sently selected.
40
En
40 CRD3576-A
All manuals and user guides at all-guides.com
3
7
0
8 9
Black plate (40,1)
6 DSP button
Press to select digital signal processor func-
tions.
7 BAND button
Press to return to the display of each
source.
8 16 buttons
Press to recall equalization curves and
sound field programs.
9 c/d buttons
Press to choose the item (mode) of the se-
lected function.
a a/b buttons
Press to adjust the selected function and
turn it on/off.
Press DSP to display the DSP function
%
names.
Press DSP repeatedly to switch between the
following functions:
PWFL (graphic equalizer)SFC (sound field
control)POSI (position selector)
# To return to the display of each source, press
BAND.
# Depending on the graphic equalizer and
subwoofer adjustments, pressing DSP repeatedly
switches between the following functions:
CUSTOM (graphic equalizer)50Hz (9-band
graphic equalizer)SFC (sound field control)
POSI (position selector)SUB.W (subwoofer)
80Hz (subwoofer setting)HPF (high pass filter)
Use the following instructions for more detail.
Note
If you do not operate the DSP function within
about 30 seconds, the display is automatically
returned to the source display.