Using The Aux Source; Selecting Aux As The Source; Setting The Aux Title - Pioneer FH-P4100R Manual De Operación

Other Functions

Using the AUX source

An IP-BUS-RCA Interconnector such as the
CD-RB20/CD-RB10 (sold separately) lets you
connect this unit to auxiliary equipment fea-
turing RCA output. For more details, refer to
the IP-BUS-RCA Interconnector owners man-
ual.

Selecting AUX as the source

Press SOURCE to select AUX as the
%
source.
Press SOURCE until AUX appears in the dis-
play.
# If the auxiliary setting is not switched on,
AUX cannot be selected. For more details, see
Switching the auxiliary setting on page 46.

Setting the AUX title

The title displayed for the AUX source can be
changed.
1 After you have selected AUX as the
source, press FUNCTION and hold until
TITLE IN appears in the display.
2 Press 1 numbered button to select
the desired character type.
Press 1 numbered button repeatedly to switch
between the following character type:
Alphabet (upper case), Numbers and Symbols
Alphabet (lower case)European letters,
such as those with accents (e.g. á, à, ä, ç)
# You can select to input Numbers and Sym-
bols by pressing 2 numbered button.
49 CRD3576-A
All manuals and user guides at all-guides.com
Black plate (49,1)
3 Press a or b to select a letter of the
alphabet.
Each press of a will display a letter of the al-
phabet in A B C ... X Y Z, numbers and sym-
bols in 1 2 3 ... @ # < order. Each press of b
will display a letter in the reverse order, such
as Z Y X ... C B A order.
4 Press d to move the cursor to the
next character position.
When the letter you want is displayed, press d
to move the cursor to the next position and
then select the next letter. Press c to move
backwards in the display.
5 Move the cursor to the last position
by pressing d after entering the title.
When you press d one more time, the entered
title is stored in memory.
6 Press BAND to return to the
playback display.
Section
12
49
En