Tuner
Listening to the radio
1
2
3
4
These are the basic steps necessary to operate
the radio. More advanced tuner operation is
explained starting on the next page.
This units AF (alternative frequencies search)
function can be switched on and off. AF
should be off for normal tuning operation (re-
fer to page 13).
1 Band indicator
Shows which band the radio is tuned to,
MW, LW or FM.
2 Stereo (5) indicator
Shows that the frequency selected is being
broadcast in stereo.
3 Frequency indicator
Shows to which frequency the tuner is
tuned.
4 SOURCE button
Press to select the tuner as the source.
5 BAND button
Press to select among three FM or MW/LW
bands.
9
CRD3576-A
All manuals and user guides at all-guides.com
5
6
7
Black plate (9,1)
6 c/d buttons (Manual or seek tuning)
Press to tune in a radio station.
7 VOLUME button
Press to increase or decrease the volume.
1
Press SOURCE to select the tuner.
Press SOURCE until you see Tuner displayed.
2
Use VOLUME to adjust the sound
level.
When you press VOLUME up/+, the volume is
raised and when pressed down/, the volume
is lowered.
3
Press BAND to select a band.
Press BAND until the desired band is dis-
played, F1, F2, F3 for FM or MW/LW.
4
To perform manual tuning, press c
or d with quick presses.
The frequencies move up or down step by
step.
5
To perform seek tuning, press and
hold c or d for about one second and
release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
# You can cancel seek tuning by pressing
either c or d with a quick press.
# If you press and hold c or d you can skip
broadcasting stations. Seek tuning starts as soon
as you release the buttons.
Note
When the frequency selected is being broadcast
in stereo the stereo (5) indicator will light.
Section
04
9
En