Stereo / Mono Setting - Fm - Sangean DPR-65 Manual Del Usuario

All manuals and user guides at all-guides.com
Stereo / Mono setting – FM
Your radio will play stereo broadcasts in stereo (via headphone) so long
as the received signal is of adequate strength. However, as a stereo
signal becomes weaker the audio signal will become poorer. It may be
preferable to force the radio to play the station in mono in order to
reduce the level of audio noise.
1. Press the Power On/Off button to switch on your radio. Tune to the
required FM radio station as previously described.
2. Press and hold the Info button to enter the advanced setting.
3. Press the Tuning Up/Down buttons until the display shows
"Mono Override" on the lower line. Press the Select button.
The lower line will show "Override Off" if the radio is in the
Auto-Stereo mode.
23
3,4,6
3,5