Scan Sensitivity Setting - Fm - Sangean DPR-65 Manual Del Usuario

All manuals and user guides at all-guides.com
Scan sensitivity setting – FM
Your radio will normally scan for FM broadcasts which are strong
enough to give good reception. However, you may wish the Auto-scan
function to also be able to find weaker signals, possible from more
distant radio transmitters. Your radio includes a local / distant option
for the Auto-scan function.
1. Press the Power On/Off button to switch on your radio.
2. If needed, press the Band button to select the FM band.
3. Press and hold the Info button until the display shows
"Mono Override" on the lower line.
4. Press and release the Tuning Up or Down buttons until the display
shows "FM Scan Zone" then press the Select button to enter the
scan zone setting.
25
3
4,5