Alecto DVM-71 Manual Del Usuario página 5

4. TROUBLE SHOOTING
No reception The power adapters may not be properly
on the parent unit connected.
Confirm that the baby unit and parent unit are ON.
The baby unit may be too far away from the
parent unit.
The baby unit and parent unit may not be properly
paired. Follow §3.1.
Interference or poor Move the parent unit closer to the baby unit.
reception The baby unit or parent unit may be placed too
close to metal objects.
Other electronic devices may be interfering with the
signal. Turn off those devices.
The battery power may be too low.
Howling (static, The baby unit and parent unit may be placed too
screeching) close together.
The volume on the parent unit may be set too high.
Can't hear the baby Volume setting may be too low.
on the parent unit
Image frozen Restart the baby unit (plug out the adapter, then
plug it into the socket again).
Press the reset key at the back of the parent unit.
5. SPECIFICATIONS
Frequency 2.4GHz FHSS
Frequency range 2403.5 - 2468 MHz
Operating Range Indoor: Up to 50 meters
Outdoor: Up to 300 meters
(straight line and open space)
Power adapter Model: K05S050100G
Power adapter Input: 100-240VAC~50/60Hz 0.2A
input Output: 5.0V DC, 1.0A
Output power 2.7 W
Average active 73.7%
efficiency
Efficiency at low -
10% load
No load Power 0.05 W
consumption
Maximum power <20 dBm
LCD 2.4" TFT LCD
Display 240x320 RGB
resolution
Rechargeable batte- Li-polymer battery pack
ry for parent unit 3.7V; 950mAh; 3.515Wh
Operating time with Up to 10 hours (VOX on)
battery fully charged
Operating environ- Temperature: 0°C to 40°C (32°F to 104°F)
ment
Relative humidity: 15% - 85%
Storage Temperature: -20°C to 70°C (-4°F to 158°F)
environment
Relative humidity: 15% - 85%
Dongguan Guanjin Electronics Technology Co., Ltd, Block 16 Qiantou New Industrial
Park, Niushan, Dongcheng District, 523128 Dongguan City, Guangdon Province, China.