Gb Operating Instructions; Inserting And Replacing The Batteries; General Information - König KN-URC20B Manual De Instrucciones

All manuals and user guides at all-guides.com
OPERATING INSTRUCTIONS
GB
König KN-URC20B universal remote control
We congratulate you on the purchase of a König universal remote control. Your new remote control replaces the
original remote control of your TV set and the remote control of your satellite receiver or DVB-T (Freeview)/cable
box (referred to below as STB).
Read all instructions carefully and retain the instructions for reference at a later date.
You can program your remote control using the operating instructions and the associated code and brand list, via
the following methods:
a) by manual programming, by entering a four digit code from the code list,
b) by automatic programming, depending on the brand, by entering the three digit code from the brand list
c) by an automatic searching
d) or by programming the original remote control codes.
We recommend starting by using the manual programming method (a).
Operating mode TV and TV+STB
Your new KN-URC20B remote control has two different operating modes.
This allows you to operate both the digital tuner (DVB-T/S/C) integrated in the set and also external satellite
receivers or a DVB-T/Cable Box (STB).
In the fi rst operating mode pre-set on delivery (TV) all keys on the KN-URC20B remote control operate the TV set.
When you program a STB code (whether manually or automatically by searching), your KN-URC20B remote
control switches to the second operating mode (TV+STB). In this operating mode, only the TV-Standby (
AV ( ) keys operate the TV set. All the other keys operate the satellite receiver or the DVB-T/Cable Box (STB).
av
Switching between TV and STB is no longer necessary when using your new KN-URC20B remote control.
If you want to return to the fi rst operating mode (TV) after programming the STB, you need to fully reset the
remote control. See function "Deleting settings (reset)".

Inserting and replacing the batteries

Your KN-URC20B remote control is powered by two 3-Volt lithium batteries (CR 2032). Insert the batteries in
accordance with the markings on the battery compartment. Please take extra care to ensure correct polarity.
Dispose of the old batteries in accordance with local regulations.
Note :
Your KN-URC20B has an internal memory to make sure that the programming is retained after changing the
batteries.
We recommend that you always use new batteries. Never combine old and new batteries because the
performance of your remote control and the service life of the batteries will be negatively affected.

General information:

Your KN-URC20B is fi tted with a 5 second protection mechanism. When programming, you must press a button
within a period of 5 seconds, otherwise the remote control reverts back to its regular operating mode.
Note :
A short double fl ash of the signal LED confi rms the input, a long fl ash indicates cancellation.
If you enter a code number incorrectly, press any key and wait for a long fl ash of the signal LED. You can then
continue entering according to the instructions.
BA König KN-URC20B, 135x215 mm CS6.indd 10 BA König KN-URC20B, 135x215 mm CS6.indd 10
10
) and
tv
12.09.2012 09:32:06 12.09.2012 09:32:06