EAS ELECTRIC EMR44VNI1 Manual De Instrucciones página 40

3) Take out the left upper hinge (13), and fix it on the left upper corner by
screw (2). Meanwhile, install the hole caps (4) on the right upper
corner, dismantle shaft (12) of lower hinge (11) and install it into the hole
of left side, then fix the lower hinge (11) on left lower corner by screw (10).
Install the door support (9) on right lower corner by screw (8). At last,
install the air cover (7) by screw (5) and sleeve (6) on the lower side of
cabinet.
4) Remove the shaft sleeve (14) and shaft hole cap (15) of the door, and
change their positions. Dismantle the door stopper (16), screw (17) and
lower shaft sleeve (18), and install them in the left lower corner of the
door.
16 V.1