Setting Operation For A Selected Unit - Saunier Duval SDCC-02 Manual De Instalación Y De Usuario

4- OPERATION

4.4 SETTING OPERATION FOR A SELECTED UNIT

NOTE!
During operation, press the
return to the previous step or the normal display
interface.
In normal display interface:
1. Press "Set" repeatedly to select all the units "ALL ON" or to select a
specific unit "ALL OFF".
. Press the scroll buttons and select the unit that you wish to
activate.
. Press "Set" to confirm the selection.
If, for example, unit 1 is selected, the screen will
display "1#" in the current indicator (see Figure).
. Press "Mode" to select the operating mode: "Auto" ( automatic), "Cool"
(cold), "Heat" (Hot), "Fan only" (only ventilator), "Dry" (dehumidify) or
"Off" (deactivate).
NOTE!
If you want to confirm "Off" press the
"Confirm" button.
. If "Cool" or "Heat" are selected, press "Add" or "Reduce" to adjust the
temperature (temperature range between 17 and 0 ºC).
NOTE!
The temperature can not be set for other
selections.
6. Press "Fan" to select the fan speed: "Low", "Middle" or "High".
7. Press "Swing" to select the direction of the airflow.
8. Press "Confirm" to save the settings and exit.
"CANCEL" button to
Cancel
16
Set
UP
LEFT DOWN
Current
# ALL
Online
OFF
Set
Period
T2A T2B T3
1 2 3 4
ON
Mode
Add
Fan
Swing
Confirm
RIGHT
Set. temp
Protect
Error
Room.temp
OFF
or
Reduce