Changing Programming Settings - Saunier Duval SDCC-02 Manual De Instalación Y De Usuario

4- OPERATION
8. Press "Left" or "Right" to select the end minute and press "Add" or
"Reduce" to change the end minute of the first programme.
9. Press "Confirm" to save the settings of the first programme.
10. P ress "Mode" to adjust the operating mode: Press repeatedly to select
the operating mode; "Cool", "Heat", "Fan only", "Automatic", "Dry" or
"Off".
I f "Cool" or "Heat" are selected, press "Add" or "Reduce" to adjust the
temperature (temperature range between 17 and 0 ºC).
NOTE!
The temperature can not be set for other selections.
11. Press "Fan" repeatedly to adjust the fan speed: "Low", "Middle" or
"High".
1. Press "Confirm" to save and exit the settings of the first programme.
1 Repeat steps  to 1 to set the second, third and fourth programme. The
SDCC-0 controller allows  operating periods to be programmed for each
day of the week.
4.10 CHANGING PROGRAMME SETTINGS
NOTE!
During operation, press the
return to the previous step or the normal display
interface.
To change the settings of any programme period:
In the normal screen interface repeat the steps in section .9 as from point 1 to replace the existing
programme periods or to create new ones.
"CANCEL" button to
Cancel
1
LEFT
RIGHT
or
Add Reduce
Confirm
Mode
or
Add Reduce
Fan
Confirm