3- Configuration Of The Directions Of The Indoor Unit - Saunier Duval SDCC-02 Manual De Instalación Y De Usuario

3- CONFIGURATION OF THE DIRECTIONS OF THE
INDOOR UNITS
Each Indoor Unit connected to the Controller
SDCC-0 must have an address that identifies it.
The address is configured directly on the
electronics board in each indoor unit. Each
electronics board has two microswitches and a
potentiometer to assign addresses.
The combination of the  possible positions
of the microswitches with the combination of
the 16 possible positions of the potentiometer,
allow for a total of 6 addresses to be set.
Configuring the address
Table 3.1 Address assignment of the indoor units
WARNING!
Danger of malfunction and
breakdown. The address assigned to
an indoor unit should not be repeated
in another indoor unit.
Figure 3.1 Microswitches and potentiometer of the
electronics board of the indoor units.
11
Address Code
00 ~ 1
16 ~ 1
 ~ 7
8 ~ 6