2- Installation; Installation Of The Weekly Programming Controller - Saunier Duval SDCC-02 Manual De Instalación Y De Usuario

2- INSTALLATION

2.1 INSTALLATION OF THE WEEKLY PROGRAMMING CONTROLLER

To install the SDCC-0 controller on the wall, proceed as follows:
1. Ensure that the diameter of the wire corresponds to its length.
. T urn a screwdriver in the notches on the upper part of the controller to separate and remove the
front cover from the back cover.
. C ontinue with the process of attaching the controller to the wall by using the mounting screws.
Figure 2.1 Installation of the controller on the wall.
Legend:
 Mounting screw (MX0)
 Circuit boards.
 Front cover.
 Connector.
 Notches for the screwdriver.
 Back cover.
NOTE!
Never overtighten the screws; the cover could
otherwise be dented or the LCD display could break.



7


