Connect With Your Smartphone; Synchronize The Door Control - LiftMaster 8500WMC Manual Del Usuario

Operation

Connect With Your Smartphone

The Wi-Fi Garage Door Opener is compatible with up to 16 myQ enabled accessories. Up to 10 devices can be paired to the Wi-Fi
garage door opener's internal gateway. These devices can be controlled with the myQ app. These devices include any combination of
myQ garage door openers, Wi-Fi garage door openers, myQ light controls, myQ gate operators or myQ commercial door operators. A
LiftMaster Internet Gateway (828LM) can be added if you need to control more than 10 devices using the myQ app. Up to 6 devices can
be paired to garage door opener itself (controlled by garage door opener through 900MHz). These devices include any combination of
myQ light controls or a garage door and gate monitor.
You will need:
• Wi-Fi enabled smartphone, tablet or laptop
• Broadband Internet Connection
• Wi-Fi signal in the garage (2.4 Ghz, 802.11b/g/n required), see page 3
• Password for your home network (router's main account, not guest network)
• myQ serial number located on the garage door opener

SYNCHRONIZE THE DOOR CONTROL

To synchronize the door control to the garage door opener, press the push bar until the garage door opener activates (it may take up to
3 presses). The garage door opener must run through a complete cycle before it will activate Wi-Fi programming.
DOWNLOAD THE myQ APP TO SET UP AN
ACCOUNT AND CONNECT
Open and close your door, get alerts and set schedules
from anywhere. Connected smart garage door openers also
receive software updates to ensure the opener has the latest
operational features.
1. Download the myQ App.
2. Set up an account and connect.
For more information on connecting your garage door
opener, visit LiftMaster.com/Customer-Support.
An LED on the
garage door opener
will indicate Wi-Fi
status. See table
above.
NOTES:
The myQ Smartphone Control WILL NOT
work if the garage door opener is operating on
battery power.
To erase the Wi-Fi settings, see page 29.
If you need help adding devices to your
myQ account, or to learn more go to
LiftMaster.com/Customer-Support.
Learn
Button
LED
Wi-Fi Status
LED Definition
Blue Off - Wi-Fi is not turned on.
Blinking - Garage door opener is in Wi-Fi learn
mode.
Solid - Mobile device connected to the garage
door opener.
Blue and Green Blinking - Attempting to connect to router.
Green Blinking - Attempting to connect to the Internet
server.
Solid - Wi-Fi has been set up and garage door
opener is connected to the Internet.
Navigation
To stop the Smart Control
Panel LCD from displaying
"CONNECT myQ APP":
On the Smart Control Panel, press
MENU, select PROGRAM and
press
press EXIT to return to the main
screen.
25
Buttons
, press BACK, then