Supplied Components; Connections - Sharp 8M-B32C1 Manual De Instalación

If any components are missing, please contact your dealer.
 Liquid Crystal Display Monitor: 1
 Cable clamp: 5
 Power cord
 Stand mounting part cover: 2
 CD-ROM: 1
 Setup Manual (this manual): 1
* SHARP Corporation holds authorship rights to the Utility Disk program. Do not reproduce it without permission.
1 2 3 4
1. HDMI1 input terminal (8K)
2. HDMI2 input terminal (8K, HDMI x 4)*
3. HDMI3 input terminal (4K)
4. DisplayPort input terminal (4K)
5. Audio output terminal
6. USB Type B port (USB2.0)
7. AC input terminal
8. Terminal for firmware update
(Normally not used.)
* Connect so that output signals from 8K-output-compliant
device are displayed on the appropriate positions.
HDMI2-A HDMI2-B
HDMI2-A
HDMI2-C
Select an audio input in HDMI2 AUDIO SELECT of the
SETUP menu. (HDMI2-A
6
E

Supplied Components

Connections

7
For
power outlet
Power cord
5
6 8
(Supplied)
HDMI2-C HDMI2-D
HDMI2-B
HDMI2-D
is selected by factory default.)
Caution
• Be sure to turn off the main power switch and disconnect
the plug from the power outlet before connecting/
disconnecting cables. Also, read the manual of the
equipment to be connected.
• Do not use any cable that has a damaged or deformed
terminal. Using such cables may cause malfunctions.
• Do not forcibly bend or apply force to cables. Doing so may
result in wire breakage or other damage.
TIPS
• Images may not be displayed properly depending on the
computer (video card) to be connected.
• If the audio output from the playback device is connected
directly to speakers or other devices, the video on the
monitor may appear delayed from the audio portion.
Audio should be played through this monitor by connecting
the playback device to the monitor, and connecting the
monitor's audio output to the speakers or other devices.
• Install SHARP Information Display Downloader.
• Download SHARP Display Calibration Utility from SHARP
Information Display Downloader.
• When using SHARP Display Calibration Utility, connect
the monitor to the computer in which SHARP Display
Calibration Utility using a commercially available USB
cable.
• When the Information Display Downloader is installed, you
can check and download the most recent versions of the
software programs.
• For detailed information of SHARP Information Display
Downloader, refer to its operation manual.
* You must be in a network environment that allows access
to the Internet.
• The terms HDMI, HDMI High-Definition Multimedia
Interface, and the HDMI Logo are trademarks or registered
trademarks of HDMI Licensing Administrator, Inc.
• DisplayPort is a registered trademark of Video Electronics
Standards Association.
• VESA is either registered trademark or trademark of Video
Electronics Standards Association in the United States and/
or other countries.
• All other brand and product names are trademarks or
registered trademarks of their respective holders.