Dynamic Range Control (Drc) - Dab - Sangean DDR-36 Instrucciones De Manejo

Dynamic Range Control (DRC) - DAB

The DRC facility can make quieter sounds easier to hear when your radio is used in a noisy
environment.
There are three levels of compression:
DRC Off No compression applied. (default)
DRC High Maximum compression applied.
DRC Low Medium compression applied.
. Press the Standby button to switch on your radio.
. Press and release the Mode button until the DAB band is selected.
. Press and release the Menu button until the Advanced DAB menu shows on the display.
4. Rotate the Tuning control until 'DRC Value' appears on the display. Press and release the
Select button. The display will show the current DRC value which will be marked with an asterisk.
5. Rotate the Tuning control to select the required DRC setting (default is off).
6. Press and release the Select button to confirm the setting. After several seconds the display
will return to the normal radio display.
Note:
Not all DAB broadcasts are able to use the DRC function. If the broadcast does not support
DRC, then the DRC setting in the radio will have no effect.
All manuals and user guides at all-guides.com
DAB
<DRC Value
DRC Value
<DRC off
DRC Value
<DRC high
DRC Value
<DRC low
GB
>
*
>
>
>