Setting The Clock Manually; System Setting - Sangean DDR-36 Instrucciones De Manejo

Setting the clock manually

Your radio will set its clock automatically using the DAB or FM radio signal. If no signal is
available and you need to set the time manually, please follow the procedure shown below.
. Press the Standby button to switch on your radio.
. Press and release the Menu button until the Advanced menu shows on the display.
. Rotate the Tuning control until 'System Setting' appears on the display. Press and release the
Select button.
4. Rotate the Tuning control until 'Time' appears on the display. Press and release the Select button.
5. Rotate the Tuning control until 'Set Time/Date' appears on the display.
6. Press and release the Select button. The hour digits will flash on the display.
7. Rotate the Tuning control to set the desired hour.
8. Press and release the Select button. The minute digits will flash on the display.
9. Rotate the Tuning control to set the desired minute.
● If the radio has been set to use a 12 hour format, there will be an option here for setting AM or
PM for the clock time.
All manuals and user guides at all-guides.com
DAB
<System Setting

System Setting

<Time
Time
<Set Time/Date
Set time
09:00
Set time
09:30
GB
>
>
>
0