Scan Sensitivity Setting-Fm - Sangean DDR-36 Instrucciones De Manejo

Scan sensitivity setting - FM
Your radio includes a local/distant option for the auto-scan function. By setting the radio to the
'local' scan option, weaker signals from more distant transmitters can be ignored by the radio,
making stronger signals easier to find.
. Press and release the Standby button to switch on your radio.
. If needed, press and release the Mode button until the FM band is selected.
. Press and release the Menu button until the Advanced FM menu shows on the display.
4. Rotate the Tuning control until 'FM Scan Zone' shows on the display. Press and release the
Select button to enter the scan sensitivity adjustment mode. The current setting will be marked
with an asterisk.
5. Rotate the Tuning control to switch between 'Local' (Strong stations only) and 'Distant' (All
stations) options on the lower line of the display. The Distant option will allow the radio to find
weaker signals when scanning.
6. Press and release the Select button to confirm your selection. The Local or Distant setting is
stored in the radio and remains in force until changed or until a System Reset.
All manuals and user guides at all-guides.com
FM
<FM Scan Zone
FM Scan Zone
<Distant
FM Scan Zone
<Local
GB
>
*
>
>
8