Sangean DDR-36 Instrucciones De Manejo página 40

To return to auto clock set mode
. Press the Standby button to switch on your radio.
. Press and release the Menu button until the Advanced menu shows on the display.
. Rotate the Tuning control until 'System Setting' appears on the display. Press and release the
Select button.
4. Rotate the Tuning control until 'Time' appears on the display. Press and release the Select button.
5. Rotate the Tuning control until 'Auto update' appears on the display. Press and release the
Select button.
6. Rotate the Tuning control to choose an update option from 'Update from Any', 'Update from
DAB', Update from FM' or 'No update' as required. The current update option will be marked
with an asterisk. Press and release the Select button to confirm your choice. The radio will exit
to the previous menu.
Note:
If you select 'Update from Any', 'Update from DAB', Update from FM' the current time received
will be displayed. If no signal is found you should either position the radio or its aerial so that a
signal can be received, or revert to manual clock mode.

All manuals and user guides at all-guides.com
DAB
<System Setting
System Setting
<Time
Time
<Auto update
Auto update
<Update from Any
Auto update
<Update from DAB
>
>
>
*
>
>