Use
Ø≤310mm
1.
This appliance has been supplied with
a PROPANE REGULATOR (only use with Propane gas).
2. This appliance is intended for use with LPG bottled
gas only. (A regulator of 28 mbar must be used for
Butane gas or 37 mbar for Propane gas.)
3. NEVER use an adjustable regulator with this product.
4. This appliance is intended to use only with Calor Patio
Gas® green propane bottle, which will supply gas all
year round, even on cold winter days.
Leak testing
1.
IMPORTANT: Perform the leak test before use in a
well-ventilated area.
2. NEVER USE AN OPEN / NAKED FLAME TO TEST
FOR LEAKS AT ANYTIME, DO NOT IGNITE THE
APPLIANCE DURING THE LEAK TESTING.
3. Confirm all the control knobs are in the of position.
4. Correctly connect the gas cylinder to the appliance as
in the previous section.
5. Open the control valve of gas cylinder.
6. Check for leaks by brushing a solution of ½ water and
½ soap (washing up liquid) over all gas system joints,
including all valve connections, hose connections,
regulator connections and jubilee clip.
7.
OBSERVE: If bubbles form over any part of the joints
there is a leak.
WINM12695 PID 173658_s1_s1 3663602431220-Good Home IM R.indd 30
8. Always wipe the mixed solution from all connections
after leak testing.
9.
Turn off the gas and tighten all joints.
10. Repeat test. If bubbles form again, do not use
the appliance. Please contact your local dealer
for assistance.
11. Leak test annually and whenever the gas bottle is
removed or replaced.
5
3
4
30
1
2
19/11/2018 16:57