Maintenance
01 At the beginning of the season
•
Check and tighten all screws & bolts, etc on
the appliance.
•
Inspect the burners to ensure they are free of insects,
food residue or other debris which may have collected
in the burner holes.
•
Check that the venturi tubes of the burners properly
fit over the valve outlets.
•
Inspect the hose for cuts, cracks, or excessive wear
before use. If the hose is damaged, it must be replaced
with hose suitable for use with LPG and meet the
national standards for the country of use. The length
of the hose must not exceed 1.5 m.
02 At the end of the season
•
The burners should be removed and cleaned annually,
or whenever heavy build-up is found, to ensure that
there are no signs of blockage (debris, insects) in
either the burner portholes or the venturi tubes.
WINM12695 PID 173658_s1_s1 3663602431220-Good Home IM R.indd 34
•
Use a pipe cleaner to clear obstructions.
•
A wire brush can be used to remove corrosion from
the burner surfaces.
•
When refitting the burners, be careful to check
that the venturi tubes of the burners fit over the
valve outlets.
34
19/11/2018 16:57