Publicidad
Idiomas disponibles
Idiomas disponibles
External video source connection
STV50 allows you to connect several external video sources as a games console, camcorder, a VHS video or a VCD/DVD
player to capture their contents and edit or record them in a disc. Also you will be able to save the files in compatible for-
®
mats with Youtube
, social networks, tablets and mobile phones.
To connect STV50 to your games console or other video source device it is necessary to use the adaptor included with
the device. You can connect the external video source through AV (yellow, red and white connectors), through SVideo or
even through YpBpr (red, blue and green connectors) depending on the features of the device. Follow these steps to com-
plete the connections between the USB video capture and the video source:
Connection through AV
1. Connect a RCA cable (three connectors: yellow, red and white) to the external video source. Cable not provided.
2. Connect the end of the RCA cable to the STV50 adaptor cable. The colours must match. White and red connectors carry
stereo audio signal and yellow connector carries video signal.
3. Connect the adaptor cable to the connector located in the rear panel of STV50.
4. Complete the connections between the STV50 and the computer following the steps shown in this guide.
Connection through SVideo
1. Connect a SVideo cable to the external video source (not included).
2. Connect the end of the SVideo cable to the STV50 adaptor cable. Please note you have to connect black connector for
video signal and red and white connectors for audio signal.
3. Connect the adaptor cable to the device through a connector located in the rear panel of STV50.
4. Complete the connections between the STV50 and the computer following the steps shown in this guide.
Connection through Components
1. Connect a Components cable (red, blue and green conectors) for video signal and a RCA cable (white and red) for audio
signal to the external video source (not included).
2. Connect the end of the Components cable to the STV50 Components and RCA adaptor cable. Please note you have
to connect red, green and blue connectors for video signal and red and white connectors for audio signal.
3. Connect the adaptor cable to the device through a connector located in the rear panel of STV50.
4. Complete the connections between the STV50 and the computer following the steps shown in this guide.
7. Driver and software installation
The DVD disc provided with the device includes the device software and Power Director and Power Producer programs
from Cyberlink and VivaStation software. Before installing the software, please make sure the USB video capture STV50
from Sveon is properly connected to your computer (please refer to the "Connection" section of this user guide).
Step 1. First time you connect the device to your computer through an available USB port, the system will detect the new
device and the Windows Installation Assistant for new devices will appear. Please click on "Cancel".
Step 2. Insert the DVD Driver provided with the unit in the DVD Rom unit of your computer and the Sveon Installation As-
sistant will start automatically. If it doesn´t, please go to "My Computer" menu, double click on "DVD ROM" unit and run
the file "Autorun.exe".
7.1 Driver Installation
Step 1. Click on "Quick Installation".
Step 2. Select "Typical Installation" (recommended) or "Cus-
tom Installation" if you want to select the programs which are
going to be installed in your computer.
Click on "Install" and the following programs will be installed:
STV50 driver, Cyberlink Power Director, Cyberlink Power
Producer and VivaStation softwares.
Step 3. Click on "Start" to install the drivers of the device. If you want
to cancel the process click on "Cancel". Wait until the installation is
finished and click on "Ok".
STV50 User Manual
Index
1. Welcome
2. Features
3. System Requirements
4. Content
5. Hardware
6. Connections
7. Driver and software installation
8. Uninstallation
9. Cyberlink Power Director
10. Multimedia Video Capture
11. Preferences and options.
Power Director
12. The Workspace. Power Director
13. Production Mode. Power Director
14. Creating Discs. Power Director
15. Cyberlink Power Producer
16. . VivaStation
17. Technical Specifications
Important Information
English
35
Publicidad
