Publicidad
Idiomas disponibles
Idiomas disponibles
- Click Produce Movie Disc
- Select the video format you want to use:
• Video CD: to create a lower-quality video or a slideshow.
• DVD: to create a longer, high-quality video
• Blu-ray Disc*: to create a high-quality high definition video
that will play back on a Blu-ray Disc player.
• AVCHD*: to create a high-quality high definition video that
uses the MPEG-4 AVC (H.264) video codec.
Note: The creation of Blu-ray Disc and AVCHD media is op-
tional and only available in some versions of CyberLink Po-
werProducer.
- Set your other options as necessary:
• Specific video recording format: select a specific video re-
cording format.
• Disc capacity: select the capacity of the disc you are using.
• TV Aspect Ratio: select the TV aspect ratio for your disc.
- Click Next to continue
Step 2. Acquiring content
Your production can contain a mixture of video and photos. The import and capture functions are located on the Content
window within the Produce Movie Disc function.
Note: Some camcorders are recognized as external disk drives on your PC. In this case you can use the Import Video Files
function to import the files directly from the external drive (camcorder) to your hard drive.
To open the content window, do this:
1. Start Cyberlink Power Producer.
2. Click Produce Movie Disc.
3. Select your disc type and then click Next. The content
window opens.
4. Select whether to import or capture media from the list
of available options on the left-hand side:
• Import: video files, photos or scenes on a
disc.
• Capture: from a variety of sources.
Note: Some discs are protected by technology that does
not allow you to import the content they contain.
Capturing Video
With CyberLink PowerProducer you can capture video
(including the audio) from:
• a camcorder
• a VCR
• a DVD player
• video players with video output
To begin capturing video, do this:
1. Click Video under the Capture function on the Content
window.
2. In the window that opens, select the source you want
to capture from the drop-down list.
3. Locate the content you want to capture.
4. If required, select Auto-recording duration and then
enter the length of the video you want CyberLink Power-
Producer to capture.
5. Click on the record button (red circle) to begin capture.
6. Click on the white square button to end the capture when you have captured the video you want. If you selected Auto-
recording duration, CyberLink PowerProducer will stop capturing automatically once the duration has been reached.
STV50 User Manual
Index
1. Welcome
2. Features
3. System Requirements
4. Content
5. Hardware
6. Connections
7. Driver and software installation
8. Uninstallation
9. Cyberlink Power Director
10. Multimedia Video Capture
11. Preferences and options.
Power Director
12. The Workspace. Power Director
13. Production Mode. Power Director
14. Creating Discs. Power Director
15. Cyberlink Power Producer
16. . VivaStation
17. Technical Specifications
Important Information
English
54
Publicidad
