Therabody RecoveryAir JetBoots Manual página 7

Ocultar thumbs Ver también para RecoveryAir JetBoots:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 35
Important Safety Information
Caution
Do not operate the RecoveryAir JetBoots while operating a vehicle.
Do not store or transport the RecoveryAir JetBoots beyond the specified temperature, humidity, and atmospheric pressure range.
Do not use the RecoveryAir JetBoots beyond the specified temperature range: 10 to 30°C (50 to 86°F).
Do not use the RecoveryAir JetBoots beyond the specified humidity range: 30%rH–75%rH, noncondensing.
Only use the RecoveryAir JetBoots up to 3000m above mean sea level.
To prevent any damage to the RecoveryAir JetBoots, keep it away from dust, lint, and dirt. Keep away from sources of heat or moisture.
To prevent any damage to equipment, use only accessories, detachable parts, and materials described in this User Manual.
While in use, place the pump on a horizontal firm surface only. Do not place the pump on a bed, blanket, mattress, pillow, or soft furniture. Do not cover the pump.
The equipment is to be installed and put into service according to the EMC information provided in Chapter 11 - EMC Manufacturer Declarations.
Portable and mobile RF communication equipment might affect the equipment.
For indoor use only.
Use only the DC power adapter provided with the pump.
The massage sensation should be pleasant and comfortable. If you experience pain or discomfort during or after the massage or if there is onset of bruising or irritation during or after the massage,
discontinue use and consult your physician.
Do not hand or machine wash. Surface wipe only.
Do not allow liquid to get into the air inlets.
Do not use bleach.
Do not dry clean.
Do not wring, iron, tumble, or force heat dry.
Labels
The following labels and symbols appear on the pump, garments and/or packaging.
Label
Description
IP 22
Degree of protection against ingress of water
Read instructions before use
Read instructions before use (for China only)
Class III equipment
(only in the EU per IEC60335-2-32)
Equipment relying on limitation of voltage to
extra-low-voltage (ELV) values as provision for
basic protection and with no provision for fault
protection.
Location
Label
On garment label
On garment label
On garment label
On garment label
(only in the EU)
Description
Read instructions before use
Level of protection type BF applied part
Double insulation
Direct current
EN
Location
On garment label
On garment label
On DC power
adapter
On garment label
6

Publicidad

Tabla de contenido
loading

Tabla de contenido