STERWINS HSWC.2 Instrucciones De Montaje, Utilización Y Mantenimiento página 121

7.2 TROUBLESHOOTING
Problems
Check that the filter is clean and the pump is switched
Cleaner stops and
starts, or
won't move at all
Cleaner is missing
towards the floor of the pool, adjusting the eyeballs,
spots in the
pool.
example, high pH and/or lack of chlorine, makes the
Cleaner doesn't
Note: In pools with a sharp 90 degree wall-to-floor it is
climb
unreasonable to expect the cleaner to climb the walls.
Cleaner spend too
much time
on the walls and/or
climbs out
Adjust the hose weight provided towards the cleaner
of the water.
Probable causes
on.
Ensure that the vacuum plate is properly installed.
Check the diaphragm for any damage or blockages
Disengage the safety suction, ensure main drain is
plugged.
Check the cleaner and hose are free of trapped air.
Ensure that the correct amount of hose is installed.
Ensure that all the returns are directing waterflow
or using water diverters available at your local pool
shop.
Ensure that hose is straight and untangled.
Ensure the pool water is properly balanced. For
walls very slippery.
Check float arm is in the correct position.
Increase the suction using the speed controller.
Decrease the suction using the speed controller.
head.
121
Qualification
required
-
-
-
-
-
-
-
-
-
-
-
FR
ES
PT
IT
EL
PL
UA
RO
BR
EN