Sirius SLT962 Instrucciones De Uso Y De Montaje página 18

MAINTENANCE
Accurate maintenance guarantees good ope-
ration and long-lasting performance over the
years..
* Particular care is due to the grease filter.
SLT962
The grease filter is fixed through magnets,
therefore you only need to insert a hand tool
or the tip of a knife in the specific oval ope-
ning, and push upwards in order to pull the
filter out of its seat
See Fig. 1.
In order to remove the filter from the hood,
you need to disengage the two safety cables,
by opening their snap-hooks.
The charcoal filter can be removed only after
the grease filter has been removed, by using
the specific handl (fig.17).
SLT963
Open the glass panel, rotating it as shown in
Fig. 10, then disengage the grease filter by
using its specific handle.
The metal grease filter can be hand-washed
or cleaned in the dishwasher.
The charcoal filter shall be replaced depen-
ding on use, at least once every six months.
To clean the appliance itself tepid water and
neutral detergent are recommended, while
abrasive products should be avoided.
The power cable must be replaced only by
qualified personnel.
The LED lamps must be replaced only by qua-
lified personnel.
18