Advanced Bionics Slim HP Standard Instrucciones De Uso página 9

Attach the headpiece and cable to your sound
3.
processor (See "Cables" section).
4. Then place the bottom side of the headpiece over the
internal magnet of your cochlear implant.
NOTE: For recipients of HiRes Ultra 3D implants, if the
headpiece repels or pushes away when brought over
the internal device, rotate the headpiece back and forth
as you move the headpiece closer towards the implant.
Once attraction is felt, adjust the headpiece to the
original orientation and place on head.
NOTE: For recipients of HiRes Ultra 3D implants, when
in a magnetic field or when the headpiece is removed,
you may feel the internal components of the magnet
vibrate and/or rotate. This movement is expected as
the magnets are designed to rotate in the presence
of strong magnetic fields. This movement may be
noticeable and is not expected to be uncomfortable.
Cables
Slim HP Standard has separate cables.
Attaching the cable to the sound processor
To attach the cable to the sound processor, hold the
headpiece cable by the cable's strain relief. Align the
connector on the cable with the connector on the sound
processor and gently push the cable into the sound
processor until it snaps into place.
7