It is recommended that the high chair be used in the upright
position only by children capable of sitting upright unassisted.
Using the Footrest
The footrest can be adjusted to a more upright position if desired for a small child.
• To adjust it, press the release buttons in on both sides of the footrest and rotate it upwards to a
horizontal position until it locks into place. (28)
• Grasp the lower footrest panel and pull it out so that it is vertical. (29)
• To use the footrest in the lower position, press the release buttons in on both sides and rotate the
footrest downward until it locks into place.
Folding the High Chair
• Keep children away from high chair while folding.
• Simultaneously press the gray buttons on both sides of the adjustable legs of the stand and move
the legs to their lowest position. (30)
• While grasping the high chair with one hand, use the other hand to slide the secondary lock on the
lower leg frame to the side and then squeeze the folding button on this leg frame. (31)
• Continue to squeeze the folding button and rotate the rear legs toward the high chair until they
lock into place. (32)
• Release the folding button and then gently pull on the legs to ensure they are secure.
Note that the high chair can be folded with the seat installed.
Infant Booster - Using High Chair Seat on Adult Chair Mode (No. 2)
IMPORTANT NOTE: Refer to the diagram below. Use the high chair seat as an infant booster
ONLY on an adult chair that has the following MINUMUM dimensions:
Chair seat minimum width: 16" (40.6 cm)
Chair seat minimum depth: 17" (43.2 cm)
Chair backrest minimum height: 8" (20.3 cm)
Adult chair MINIMUM dimensions for use of high chair seat as a booster.
• Detach the high chair seat from the stand following "Detaching the High Chair Seat" instructions above.
• Turn the seat upside down and locate the rear frame support. (33)
8
I WARNING