• Press the buttons on BOTH sides of the rear frame support and rotate the support toward the
back of the seat. (34)
• Open the storage bag on the bottom of the seat and remove the two straps. (35)
• Unbuckle both straps. Allow the straps to hang down freely on the side of the seat with one
matching pair of straps oriented toward the front of the seat and the other pair toward the rear. (36)
• Rotate the lower footrest panel to its closed position.
• Press in the buttons on both sides of the footrest and rotate it to its closed position. (37)
• Place the seat on an adult chair, being careful not to tangle the straps. (38)
• Wrap the straps that are closest to the front of the seat around the bottom of the adult seat and
attach the buckle ends together. Tighten by pulling on the loose strap. (39)
• Wrap the straps that are closest to the back of the seat around the back of the adult seat and
attach the buckle ends together. Tighten by pulling on the loose strap. (40)
• Ensure the seat is securely attached by moving it from side to side and front to back.
The tray can be used on the infant booster seat by following the instructions above for "Installing/
Removing and Operating the Tray" and also "Using the Tray Insert."
ALWAYS use this booster in the upright position on an adult chair.
NEVER use booster seat on the floor as a floor seat.
I WARNING
9