Kitchen Timer; Panel Lock; Wipe Protection; Basic Settings - Thermador Masterpiece Serie Guía De Uso Y Cuidado

5.7 Kitchen timer
You can use the Kitchen timer to set a time of up to
99 minutes.
The Kitchen timer is independent from other settings and
does not switch off a cooking zone.
You can also use the Kitchen timer when the cooktop is
turned off or the panel lock is activated.
Setting the Kitchen timer
WARNING
Boilovers can cause smoke and some foods and oils may
catch fire if left on high temperature settings.
When using a timer, always supervise the cooktop.
▶
Do not allow anything to boil over or burn.
▶
Press TIMER.
1.
and light up on the timer display.
a
Set the desired time in the settings area.
2.
The time starts to count down.
a
When the time has elapsed, a beep sounds.
a
and blink in the timer display.
a
Press TIMER to stop the signals. After 10 seconds the
3.
signals stop automatically.
Changing or canceling the kitchen timer
Press TIMER.
1.
Set the desired time in the settings area.
2.
To cancel the kitchen timer, set the time to ⁠ ⁠ .
5.8 Panel lock
You can use the panel lock to prevent the cooktop from
being turned on accidentally.
CAUTION
The panel lock may be turned on and off accidentally due
to:
water spilled during cleaning
▶
food that has overflowed
▶
objects being placed on the panel lock touch key.
▶
Activating the panel lock
Requirement: The cooktop is turned off.
Touch LOCK for 4 seconds.
▶
The indicator over LOCK lights up for 10 seconds.
a
The control panel is locked.
a
Deactivating the panel lock
Touch LOCK for 4 seconds.
▶
The control panel is unlocked.
a
Automatic panel lock
This function automatically activates the panel lock when
you switch off the cooktop.
The automatic panel lock can be activated in the basic set-
tings → Page 15 .
5.9 Wipe protection
With this function you can avoid changing the settings
while cleaning the control panel during cooking.
This function does not lock the main switch. You can turn
the cooktop off at any time.
Activating wipe protection
Touch LOCK.
▶
The indicator above LOCK lights up.
a
The control panel is locked for 35 seconds.
a
After 30 seconds a beep indicates that the wipe protec-
a
tion is about to turn off.
Deactivating wipe protection
You can turn off the wipe protection manually.
Touch LOCK.
▶
The indicator above LOCK goes out.
a
5.10 Basic settings
You can configure the basic settings for your appliance to
meet your needs.
Basic settings overview
Here you can find an overview of the basic settings and
the preset factory settings.
Display Function

Panel lock

– Manual 1
– Automatic
– Function deactivated
Signal tones
– Confirmation signal and error signal are
off. The main switch signal remains on.
– Only error signal is on.
– Only confirmation signal is on.
– Confirmation signal and error signal are
1
on .
Duration of timer end signal
– 10 seconds
– 30 seconds
– 1 minute
Automatically activating cooking zone exten-
sions when a cooking zone is selected.
– Off
– On 1
– Last selected setting before turning off
the cooking zone.
Time for setting a cooking zone after selec-
tion
– Unlimited: The last selected cooking zone
remains selected. You can adjust the settings
without having to select it again
– Limited: You can adjust the settings for
the selected cooking zone within 10 seconds.
After 10 seconds you have to select the
cooking zone again.
Restore factory settings
– Off 1
– Restore appliance to factory settings
1 Factory setting
Operation en-us
1
1
.
15