Technical Specifications - STEINEL True Presence Multisensor KNX Manual

12. Technical specifications

Dimensions
(W × H × D in mm)
Current consumption
Power supply
Mounting height
Detection zone
Reach
Sensor values
True Presence Multisensor
KNX outputs
Time setting
Multisensor AIR KNX outputs HVAC, VOC, temperature, relative humidity, dew point,
Twilight setting
Temperature range
IP rating
True Presence frequency
UWB transmitter power
Bluetooth frequency
Bluetooth transmitter power 5 dBm/3 mW
Concealed installation:
Surface-mounted installation:
True Presence Multisensor KNX:
Multisensor AIR KNX:
KNX bus voltage 21-30 V
2-12 m
360°
Ø 9 m True Presence (mounted up to a height of 4 m)
Ø 15 m presence
Ø 15 m movement
(can be set to within one centimetre)
True Presence (only True Presence Multisensor KNX)
Light measurement
Temperature:
Air pressure:
Relative humidity:
VOC:
CO₂:
4× light output (ON/OFF, dimming level, scene)
Dimming level with effect light
2× constant-lighting control with basic light level
HVAC, presence, CO₂, VOC, temperature,
relative humidity, dew point, logic gate, anti-presence,
air pressure, comfort
30 seconds to 18:12:15 hours (hh:mm:ss), IQ mode
logic gate, air pressure, comfort, CO₂
2-1000 lux
0°C to +40°C
IP20
7.2 GHz (responds to micro-movements resulting from
the vital functions)
≤ -41dBm/MHz
2.4-2.48 GHz
- 17 -
123 × 123 × 33
142 × 142 × 44
40 mA
15 mA
0-40°C
300-1200 hPa
0-100%
0-1000 ppm
300-5000 ppm