Maintenance Tasks; Cleaning; Maintenance - Mettler Toledo LV12 Manual De Referencia

6 Maintenance

To guarantee the functionality of the accessory, a number of maintenance actions must be performed by the
user.

6.1 Maintenance tasks

Maintenance action

Cleaning

See also
Cleaning Page 16
6.2 Cleaning
6.2.1 Disassembling for cleaning
Injury due to sharp objects
Contact with accessory components which may have sharp edges, e.g. feeder plate, could lead
to injuries.
The feeder plate is made of stainless chrome steel and can be removed for cleaning as follows:
1 Disconnect power plug.
2 Press slightly together the side walls of the housing (1) and simultaneously lift off the plastic cover (2).
3 Detach the feeder plate (3) by turning it counter clockwise along the slotted holes.
16 Maintenance​ ​
Recommended interval
After every use
Depending on the degree of pollution
Depending on your internal regulations
(SOP)
CAUTION
Always proceed with focus and care.
2
1
Remarks
see "Cleaning"
3
Automatic Feeder