Programming Your Coffeemaker - Bunn-O-Matic HB Manual Del Usuario

NOTE: You must set the clock to use the Auto-Start function. Remember to
reset the clock for time changes and power outages.
1. Plug power cord into standard
electrical outlet.
2. Display will flash for 10 seconds
before setting automatically. (If not
set, 12:00 AM becomes default
time.)
3. Set time using H (hour) and M (min-
ute) buttons.
All manuals and user guides at all-guides.com

PROGRAMMING YOUR COFFEEMAKER

set clock
4. Numbers scroll forward only.
5. Take care to select correct AM/PM
time.
6. Press Clock button again to set
time.
NOTE: The Auto-Start function must be activated each time you want to sched-
ule a brew. If the Auto-Start button is not illuminated, the Auto-Start function is
not activated.
-
auto
1. Press Auto-Start button. H (hour)
and M (minute) buttons will light
up, time will flash on digital display.
2. Set time using H (hour) and M
(minute) buttons. Numbers scroll
forward only. Stop at desired Auto-
Start time. Take care to select cor-
rect AM/PM time.
3. When desired time is on the digital
display, press Auto Start button to
activate. It will be set and Auto-
Start will activate or wait 10 sec-
onds and it will set automatically.
NOTE: To check your Auto-Start setting at idle, press the Auto-Start button
twice and the digital display will flash the programmed time. The flashing time
will remain the set time unless you change it. After 10 seconds with no buttons
pushed, the Auto-Start button will illuminate and Auto-Start is set. To cancel,
press Auto Start again.
( )
start optional
Once activated, Auto-Start button
will illuminate white.
4. Place BUNN coffee filter and coffee
grounds into the Brew Funnel and
slide into the Funnel Guides.
5. Fill coffeemaker with the desired
amount of water and place Carafe
on base of coffeemaker (failure to
follow
steps 4 and 5 may result in prop-
erty damage).
3