Kunft KSM2612 Manual De Instrucciones página 13

2. The flat part of the sewing needle shall be
installed by turning the upper side, as shown
in fig. 2.
2.2.7. threadings
1. Insert the thread stand [43] stored in the accessories box [25] onto
the groove [31] on the back of the machine, as shown in Fig. 1
above.
2. Put the bobbin on the thread stand [43], as shown in fig. 2.
3. Pass the thread of the bobbin through the hole of the winding slice
[6] from back to front, as shown in fig. 3.
4. Pull the thread to the thread guide 1 [8], as shown in fig. 4.
5. Put the thread into the thread clamp [9] after passing through the
thread guide 1(8], as shown in fig. 5.
6. Wrap the thread from the thread guide 1 [8] to the thread guide 2
[11] after passing through the thread clamp [9], as shown in fig. 6.
7. Slide the end of the thread through the take-up lever [12], as
shown in fig. 7.
8. Slide the thread through the thread guiding spring 1 [13] after
passing through the take-up lever [12], as shown in Fig. 8.
Maq-Costura-KSM2612-Manual-2.indd 13
sewing machine
KSM2612
13
EN
18/02/19 18:34