universalblue UBLA2800-21 Manual De Instrucciones página 100

Non-fault conditions:
The door cannot be
opened.
An odor is perceived.
There is insufficient water
in the washing and rinsing
process.
There is no water inlet.
Only half of the water
supply arrives.
Water comes out when the
washing machine is in
operation.
The remaining time
changes.
An abnormal noise is heard
during spinning.
The washing machine
cannot operate after a
power failure.

The program is being executed.

There are clothes between the door and
There may be a rubber odor because some
components are made of rubber.
The washing machine only needs a limited amount
of water when in operation.
Is the faucet running? Is the water inlet pipe
frozen? Are the filters blocked?
If the water level is low, the washing machine will
automatically supply water.
Check if you added too much detergent.
If the clothes are off-center during spinning, the
spin time will be increased to correct the deviation.

Check if the power cord touches the

Have the transport bolts been

Are there hairpins or coins in the drum?
The washing machine will stop working after a
power failure. When the power is restored, it will
still not be able to operate. Press the on/off button
and restart the program.
the door seals.
frame.
disassembled?
100